EL-85PertengahanPremiumLitar transistor

Water Level Indicator (4 Levels)

A level indicator that shows the height of the water in a glass with four LEDs. Five wires hang into the water: one is common, four sit at different heights. When the water reaches a wire, that wire's BC547 transistor turns on and its LED lights: first two green, then yellow, and red at the top. Along with the red LED the active buzzer sounds too and tells you the container is full. You try out how tank gauges work, the conductivity of water and switching with a transistor.

0.0(0)
Water Level Indicator (4 Levels)
It is built with a 9 V battery, four BC547s, four LEDs, ten resistors, an active buzzer and five jumper wires as water wires. The common wire is connected to the + rail through 470 Ω; each level wire goes to the base of a transistor through 1 kΩ. When tap water joins the wires, a base current of 0.36 to 1.7 mA flows, the transistor saturates and its LED lights with about 6.8 mA. The top stage also drives the buzzer through 220 Ω. What you learn: the conductivity of water, switching with a transistor, the saturation calculation, protective resistors and why direct current in water wears the wires away.

Kandungan Premium

Langkah pemasangan, cara berfungsi dan soalan lazim litar ini terbuka untuk ahli Premium.

  • Langkah Pemasangan
  • Cara Ia Berfungsi
  • Soalan Lazim