Projek · Arduino / ESP32 / Pico

Teroka Projek Arduino

Ratusan projek dari pemula hingga mahir: gambar rajah litar, kod dan video. Mulakan di tahap mana pun kamu berada.

Pico W IoT Temperature and Humidity (DHT22)
PI-96Pemula
IoT

Pico W IoT Temperature and Humidity (DHT22)

Watch your room's temperature and humidity live on your phone wherever you are. This project is the step-by-step guide to the Temperature and humidity IoT template in the app, built with a Raspberry Pi Pico W and a DHT22. Go to Workshop › Devices › Add a device, pick Pico W as the board and Temperature and humidity as the template; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

1
ESP32 IoT RGB LED Strip (WS2812B)
ES-101Pertengahan
IoT

ESP32 IoT RGB LED Strip (WS2812B)

Control your room's light from your phone: pick a color, set the brightness, turn on the rainbow or breathe effect. This project is the step-by-step guide to the RGB LED strip IoT template in the app, built with an ESP32 and a 30-LED WS2812B strip using three wires. Go to Workshop › Devices › Add a device and pick RGB LED strip; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

1.0(1)
3
Pico W IoT Door Sensor (Reed Switch)
PI-97Pemula
IoT

Pico W IoT Door Sensor (Reed Switch)

Did you leave the door or window open? Check on your phone wherever you are. This project is the step-by-step guide to the Door / window IoT template in the app, built with a Raspberry Pi Pico W, a reed switch and a small magnet using two wires. Go to Workshop › Devices › Add a device, pick Pico W as the board and Door / window as the template; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

1
ESP32 IoT Plant Watering (Soil Sensor + Pump)
ES-102Pertengahan
IoT

ESP32 IoT Plant Watering (Soil Sensor + Pump)

Let the pump start by itself when the soil in your pot dries out, and watch the soil moisture live on your phone. This project is the step-by-step guide to the Soil moisture + pump IoT template in the app, built with an ESP32, a soil moisture sensor, a relay and a mini water pump. Go to Workshop › Devices › Add a device; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

Pico W IoT Motion Counter (PIR)
PI-98Pemula
IoT

Pico W IoT Motion Counter (PIR)

Count how many times someone walks through a door or hallway, and see the moment of motion live on your phone. This project is the step-by-step guide to the Motion detector IoT template in the app, built with a Raspberry Pi Pico W and a PIR motion sensor using just 3 wires. Go to Workshop › Devices › Add a device; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

ESP32 IoT Curtain Opener (SG90 Servo)
ES-103Pertengahan
IoT

ESP32 IoT Curtain Opener (SG90 Servo)

Tap + or − on your phone and the servo turns to that angle at the same moment: open and close a model curtain, a blind's tilt rod or a small lid from wherever you are. This project is the step-by-step guide to the Servo curtain IoT template in the app, built with an ESP32 and an SG90 servo using just 3 wires. Go to Workshop › Devices › Add a device; Ohmi prepares the code with your own device key. The code on this page is an example: the key and Wi-Fi details are placeholders.

3
ESP32-CAM Wi-Fi Live Camera
ES-104Pemula
Premium

ESP32-CAM Wi-Fi Live Camera

A live camera on your phone with a palm-sized board: the ESP32-CAM joins your home Wi-Fi and serves its own web page. Type the address from the Serial Monitor into your phone's browser and the live picture (MJPEG stream) appears. A button on the page turns the on-board flash LED on and off, and a list picks the resolution from 320x240 up to 1280x720. You upload the code with a CH340 USB-TTL adapter; one jumper between IO0 and GND while uploading is all it takes.

5.0(1)
ESP32-CAM Camera That Takes Photos When It Sees Motion (PIR + microSD)
ES-105Pertengahan
Premium

ESP32-CAM Camera That Takes Photos When It Sees Motion (PIR + microSD)

A battery-powered motion camera for a bird box or the front door. When the HC-SR501 PIR sees motion, the ESP32-CAM wakes from deep sleep, takes three photos and saves them in order on the board's own microSD slot as foto_0001.jpg, foto_0002.jpg. The photo number lives in EEPROM, so the order survives a battery change. When the motion is over the board goes back to sleep; no Wi-Fi or app needed.

ESP32-CAM Telegram Security Camera
ES-106Mahir
Premium

ESP32-CAM Telegram Security Camera

When your door opens or something moves in the room, the ESP32-CAM takes a photo and your Telegram bot sends it to your phone. A reed switch and magnet guard the door, a PIR HC-SR501 watches the room. Type /photo to the bot for a photo on demand; /flash on, /alarm off and /status run the camera from anywhere. The bot only listens to your own chat id. You get the token from @BotFather; the steps are in the FAQ.

The Counter That Never Misses: Interrupt or Loop? (Arduino + TM1637)
AR-166Pemula
Premium

The Counter That Never Misses: Interrupt or Loop? (Arduino + TM1637)

An interrupt and the loop both watch the same button: on the TM1637 display the loop's count sits on the left, the interrupt's on the right. While the loop does a slow 300 ms job it misses most fast presses (only 7 of 18 in the video), the interrupt misses none. With the MODE button you set the slow job to 0, 100 or 300 ms and measure the difference yourself. Covers attachInterrupt, volatile and safe reading.

Timer1 Stopwatch That Never Drifts (Arduino + TM1637)
AR-167Pertengahan
Premium

Timer1 Stopwatch That Never Drifts (Arduino + TM1637)

The Timer1 hardware counter fires an interrupt every 10 ms and the stopwatch counts hundredths with it; however busy the loop gets, the time does not drift. Next to it a second clock counts with delay(10), and button B lets you compare the two on the TM1637 display. In the video, over 15.36 seconds the delay clock counted only 6.22. Covers CTC mode, the prescaler, the OCR1A maths and the ISR.

A Menu That Never Skips: Rotary Encoder with Interrupts (Arduino + KY-040 + I2C LCD)
AR-168Pertengahan
Premium

A Menu That Never Skips: Rotary Encoder with Interrupts (Arduino + KY-040 + I2C LCD)

Both pins of the KY-040 rotary encoder are read with interrupts, and you build a turn-and-press settings menu on an I2C LCD: brightness, volume and timer. Even with a slow 50 ms job in the loop, not a single step is lost. In the Step test, spin the encoder fast: in the video the interrupt counted 50 steps, the loop only 10. Covers direction decoding with a state table and debouncing.