EL-28Boshlang‘ichPremium555 taymer sxemalari

Adjustable-Speed Flasher: 555 Circuit with a Potentiometer

Replace the fixed resistor in the 555 Flasher circuit with a potentiometer to adjust the LED's flashing speed by hand. At one end, it flashes about 1.3 times a second; at the other, about 10 times. Learn how to wire the pot as an adjustable resistor, what the frequency formula gives at both ends and how the fixed 1 kΩ resistor in series with the pot protects the 555.

0.0(0)
Adjustable-Speed Flasher: 555 Circuit with a Potentiometer
It is built with a 9 V battery, one NE555, a 10 kΩ potentiometer, two 1 kΩ resistors and one 470 Ω resistor, 47 µF and 10 nF capacitors and one LED. The pot changes the resistance between pin 7 and pin 6 from 1 kΩ to 11 kΩ; the frequency varies from about 1.3 Hz to 10 Hz. At the slowest end you can count the flashes; at the fastest end you see the LED flicker. What you learn: wiring the pot as an adjustable resistor, astable frequency calculation, the ratio of on and off times and the protective resistor.

Premium kontent

Bu sxemaning o‘rnatish qadamlari, qanday ishlashi va ko‘p so‘raladigan savollari Premium a’zolar uchun ochiq.

  • O‘rnatish qadamlari
  • Qanday ishlaydi
  • Ko‘p so‘raladigan savollar