EL-69O‘rtaPremiumSanagich sxemalari

Back-and-Forth LED Scanner: A Sweeping Light with the 555 and 4017

On six LEDs, a light runs to one end and, once it gets there, turns around and comes back: a sweeping scanner light effect. The NE555 (U1) produces the clock pulses, the CD4017 (U2) counts ten steps and eight 1N4148 diodes (D1 to D8) spread those ten steps over six LEDs as a trip out and back. You set the speed with the RV1 potentiometer. You learn about the diode OR connection and how much current a CD4017 output can supply.

5.0(1)
1 bajarildi
Back-and-Forth LED Scanner: A Sweeping Light with the 555 and 4017
It is built with a 9 V battery, one NE555 (U1), one CD4017 (U2), eight 1N4148 diodes (D1 to D8), six red LEDs, eight resistors, three capacitors and one potentiometer. The clock of U1 is the same as in circuit 68; U2 makes one of its outputs 1 on every pulse. The middle four LEDs are fed through diodes from two outputs each, and each of the two end LEDs gets one output directly; this way ten steps carry the light to one end and bring it back. What you learn: the diode OR, the output current limit, clock frequency.

Premium kontent

Bu sxemaning o‘rnatish qadamlari, qanday ishlashi va ko‘p so‘raladigan savollari Premium a’zolar uchun ochiq.

  • O‘rnatish qadamlari
  • Qanday ishlaydi
  • Ko‘p so‘raladigan savollar