9V Battery Clip
Components

9V Battery Clip

0.0(0)
3
The 9V battery clip is a small connector that snaps onto the terminals of a 9V battery and joins it to the circuit with two wires. The red wire is positive and the black wire is negative; the wire ends are usually tinned and push straight into the power rails of a breadboard. It needs no soldering, so you can attach and remove the battery in seconds and cut the supply easily while you change the circuit. Even touching the clip to the terminals the wrong way round puts a brief reverse voltage on the circuit, so place the wires on the breadboard first and snap the battery on last. If the wire ends are thin and stranded, twist them lightly together before pushing them in. Make sure the bare ends never touch each other, or the battery is short-circuited and heats up.