The IRLZ44N is an N-channel power MOSFET that lets you switch large loads such as motors or LED strips with a small control voltage. Its gate is logic level: with 5 V between gate (G) and source (S), its on-resistance drops to at most 0.025 Ω, so an Arduino, ESP32 or 555 output can drive it directly. Its threshold is 1 to 2 V; full turn-on at 3.3 V is not guaranteed. In the TO-220 package, printed face towards you and legs down, the pins from left to right are 1 G (gate), 2 D (drain) and 3 S (source); the metal tab is connected to the drain. It withstands up to 55 V from drain to source; keep the gate within ±16 V. Connect the load between + and the drain and the source to GND; put about 100 Ω in series with the gate and 10 kΩ between gate and source. Loads with coils, such as motors and relays, need a diode in reverse parallel across the load. Up to a few amps it only gets slightly warm without a heat sink; fit one for larger currents. Static electricity can damage the gate; touch something metal before handling it.

