AR-136IntermediatePremium
Arduino Remote Claw Machine Game: Grab the Plush in 30 Seconds (IR + 3 Servos + LCD)
A desktop version of the plush claw machine at the mall, played with a TV remote. Three servos swing the boom left and right, lower and raise the claw and open and close it; an I2C LCD shows the 30-second countdown, the try counter and a map of the machine. Just like the real thing there is a grip chance: right above the plush the claw will most likely hold it and carry it to the prize hole, one stop off and the plush slips away at the top.
0.0(0)

Bring the mall claw machine to your desk: steer the claw left and right with a TV remote, drop it with one key and watch the 30-second countdown run. Three servos swing the boom, lower and raise the claw and open and close its jaw, while the screen shows the time, your tries and the result. Line up right above the plush and the claw will most likely grab it, miss by one step and it slips away at the last moment.
Source Code
Premium Content
The source code, block version and FAQ of this project are open to Premium members.
- All Project Code
- Block version
- Frequently Asked Questions
