AR-146BeginnerPremium

Arduino 5-Minute Shower: A Clock That Starts Itself with Steam (DHT22 + TM1637 + Buzzer)

End the "who has been in the shower for 20 minutes?" fight at home: a DHT22 notices the humidity rising with the steam and the clock starts by itself, nobody has to press a button. A TM1637 display shows minutes:seconds, and a green, yellow and red LED tell the time by colour. The buzzer sounds at minute 5, then gives a short reminder every minute. When the humidity drops, the timer stops and the final time stays on the display.

0.0(0)
Arduino 5-Minute Shower: A Clock That Starts Itself with Steam (DHT22 + TM1637 + Buzzer)
Put an end to the "who has been in the shower for 20 minutes again?" argument: as soon as the hot water runs and the steam rises, the clock starts counting by itself, no button needed. The time ticks on the display, a green, yellow and red light show the minutes by colour, and a warning sound comes at minute five; when the shower is over, the final time stays on the display. You build a home gadget that helps both the water bill and the queue for hot water.

Source Code

Premium Content

The source code, block version and FAQ of this project are open to Premium members.

  • All Project Code
  • Block version
  • Frequently Asked Questions