AR-176BeginnerPremium
Arduino Aircraft Navigation Lights: Scattered Strobes, a Beacon and Park, Taxi, Flight Modes (7 LEDs + Button)
Bring an airliner's exterior lights to your desk: the red position light on the left wingtip and the green one on the right stay on, the red beacon on the fuselage glows and fades slowly, and four white strobes fire short double flashes at a scattered rhythm. Each press of the button steps through the park, taxi and flight modes. Timing runs on millis(), the main loop never waits. The rhythms are close to real but representative.
0.0(0)

Build the aircraft lights you see in the night sky with seven LEDs. The red and green lights on the wingtips show which way the plane is heading, the red beacon on the fuselage warns the ground crew while the engines run, and the white strobes make the plane visible from far away. Each press of the button switches between the park, taxi and flight modes, and each mode lights a different set. You learn timing without waiting, a soft PWM glow and cleaning up button bounce.
Source Code
Premium Content
The source code, block version and FAQ of this project are open to Premium members.
- All Project Code
- Block version
- Frequently Asked Questions
