AR-135IntermediatePremium

Arduino Tower Crane (NEMA 17 Stepper Motor + A4988 + Servo + Joystick + I2C LCD)

A desktop tower crane: a NEMA 17 stepper on an A4988 driver turns the tower on a speed ramp, an SG90 servo lowers and raises the hook, and a joystick is the operator lever. Rotation stops at ±170°; while the tower slews, a yellow beacon flashes and the buzzer goes "beep-beep". The joystick button saves 3 stops; a long press lets the crane carry the load alone, and a touch on the lever means STOP. The I2C LCD shows angle, hook depth and stops.

0.0(0)
Arduino Tower Crane (NEMA 17 Stepper Motor + A4988 + Servo + Joystick + I2C LCD)
Set up a tiny building site on your desk: push the joystick sideways and the tower picks up speed smoothly as it turns, push it forward and the hook slowly drops. While the tower swings, a yellow beacon flashes and a warning beep sounds, and the screen shows the angle and how deep the hook is. Save three stops and the crane carries the load between them on its own, stopping the moment you touch the lever.

Source Code

Premium Content

The source code, block version and FAQ of this project are open to Premium members.

  • All Project Code
  • Block version
  • Frequently Asked Questions