ES-71AdvancedPremium
ESP32 PID Ball and Beam (HC-SR04 + Servo + I2C LCD + 3 Potentiometers)
The classic control engineering experiment on your desk: a servo tilts a beam and PID holds the ball on target. Three potentiometers change Kp, Ki and Kd live: with P alone the ball swings, D damps it and I cancels the beam's slight lean so the ball lands right on target. The I2C LCD shows the beam, ball and target, plus settling time and overshoot. In SIM mode a physics model rolls the ball; in REAL mode an HC-SR04 measures it.
0.0(0)

A small balancing rig that keeps a ball exactly where you want it on a beam by tilting the beam. Turn three knobs to change the controller's gains live and watch the ball swing at first, then calm down and settle on target; a distance sensor tracks the ball and a servo tilts the beam. You get to try the idea behind self-balancing robots and drones with your own hands.
Source Code
Premium Content
The source code, block version and FAQ of this project are open to Premium members.
- All Project Code
- Block version
- Frequently Asked Questions
