AR-124IntermediatePremium
Arduino 3-Floor Elevator (NEMA 17 Stepper Motor + A4988 + Servo Door + TM1637)
Build a model elevator that steals the show at the science fair! A NEMA 17 stepper driven by an A4988 lifts and lowers the cabin smoothly; at each floor it plays a "ding-dong", an SG90 servo opens the door and closes it after three warning beeps. Calls are served like in a real elevator: floors ahead first, then the way back, and the cabin stops for calls on the way. The TM1637 display shows the direction arrow, floor and door state.
0.0(0)

A model elevator that will draw a crowd at any science fair: press a floor button and a stepper motor lifts the cabin smoothly, a "ding-dong" plays when it arrives, and a small servo opens the door. Calls queue up just like in a real elevator; if someone calls from a floor in between while the cabin is going up, it stops there. The screen shows the direction arrow, the floor number and when the door is open.
Source Code
Premium Content
The source code, block version and FAQ of this project are open to Premium members.
- All Project Code
- Block version
- Frequently Asked Questions
