AR-116IntermediatePremium

Arduino Product Turntable (NEMA 17 Stepper Motor + A4988 + LCD)

Build your own turntable for product photos and 360-degree videos! A NEMA 17 stepper is driven by an A4988 from just two signals and speeds up and slows down smoothly, so the product never wobbles. There are three modes: continuous spin with the speed on a pot, photo 360 that splits a turn into 12, 24 or 36 stops with a beep at each one, and a showcase-style ±90° swing. The I2C LCD shows speed, angle and shot count.

0.0(0)
Arduino Product Turntable (NEMA 17 Stepper Motor + A4988 + LCD)
If you want to shoot something you are selling from every angle, this turntable is made for you: put the product on top and it turns slowly by itself. A strong stepper motor rotates the plate without shaking it, and the screen shows the speed, the angle and which shot you are on. In photo mode the turn is split into equal stops; the plate pauses at each one while you take your shot, and a beep tells you it is moving on.

Source Code

Premium Content

The source code, block version and FAQ of this project are open to Premium members.

  • All Project Code
  • Block version
  • Frequently Asked Questions