PI-66AdvancedPremium
Raspberry Pi Pico Mini Oscilloscope (ILI9341 TFT Display + Potentiometer + PWM Test Signal)
A student version of the lab oscilloscope: the Raspberry Pi Pico's ADC takes thousands of samples a second and the ILI9341 colour screen draws the signal on a grid. A trigger holds the wave still while frequency, duty cycle and peak-to-peak voltage are measured. GP15 makes its own PWM test signal, ROLL mode scrolls both channels like a chart recorder and HOLD freezes the picture. It measures 0–3.3 V only.
0.0(0)

Build a little sibling of the electronics lab oscilloscope on your desk and watch invisible electricity turn into waves. A yellow and a cyan trace run across a grid on the colour screen, the lines below show how often the signal repeats and how high it goes, and one button freezes the picture. Measuring the square wave the board makes itself, you see with your own eyes how a motor's speed is controlled.
Source Code
Premium Content
The source code, block version and FAQ of this project are open to Premium members.
- All Project Code
- Block version
- Frequently Asked Questions
