PI-42IntermediatePremium

Raspberry Pi Pico Record-and-Replay Robot Arm (3 Servos + Joystick)

Show it a move once and the robot arm repeats it on its own! The Raspberry Pi Pico drives the base, shoulder and gripper with three SG90 servos; a joystick steers the arm and a click opens or closes the gripper. Press RECORD and the motion is saved every 100 ms; press PLAY and the arm follows the same path once or on a loop, at x1, x2 or x0.5 speed. The "teach and repeat" method of factory robots, right on your desk.

0.0(0)
Raspberry Pi Pico Record-and-Replay Robot Arm (3 Servos + Joystick)
An arm that works like the robots in a factory: you show it a move once with the joystick, and it repeats it on its own again and again. Three servo motors swing the arm left and right, raise and lower it, and open and close the gripper, while a red light blinks to show your moves are being recorded. The recording survives a power cut, and you can speed the replay up to twice as fast.

Source Code

Premium Content

The source code, block version and FAQ of this project are open to Premium members.

  • All Project Code
  • Block version
  • Frequently Asked Questions