PI-84IntermediatePremium

Raspberry Pi Pico W Hospital Monitor: Beep Beep ECG (OLED + Pot + LED + Buzzer)

The "beep... beep" bedside monitor from TV dramas, built with a Raspberry Pi Pico W. A potentiometer sets the heart rate from 30 to 180 BPM, a P-QRS-T wave sweeps across a 0.96 inch OLED behind an erase bar, and on every QRS the buzzer beeps and the LED flashes. TACHYCARDIA alert above 120, BRADYCARDIA below 50, and a flatline with a steady tone at the bottom. For education only, not a medical device.

0.0(0)
Raspberry Pi Pico W Hospital Monitor: Beep Beep ECG (OLED + Pot + LED + Buzzer)
Bring that beep beep sound from TV dramas, and the flatline everyone dreads, to your desk. One knob sets how fast the heart beats; a heart wave runs across a small screen, every beat brings a sound and a flash, and an alert goes off when the heart is too fast or too slow. You learn which movement of the heart each part of the wave shows. For education only, not a medical device.

Source Code

Premium Content

The source code, block version and FAQ of this project are open to Premium members.

  • All Project Code
  • Block version
  • Frequently Asked Questions