EL-82BeginnerPremiumPower supply circuits

9 V to 5 V: A Fixed Voltage with the LM7805

Get a steady 5 V from a 9 V battery: the LM7805 keeps the excess voltage across itself, so even when the battery drops from 9.5 V to 7 V the output stays at 5 V and the LED always glows with the same brightness. You measure the input and the output with a multimeter. You learn about the fixed regulator, the job of the two capacitors, the dropout voltage, the power the regulator turns into heat, and why taking 5 V from a 9 V battery is inefficient.

0.0(0)
9 V to 5 V: A Fixed Voltage with the LM7805
It is built with a 9 V battery, one LM7805, two small capacitors, one resistor and a red LED. Pin 1 goes to the input, pin 2 to GND and pin 3 to the output. C1 (330 nF) sits at the input and C2 (100 nF) at the output, where the datasheet recommends them. The output is 5 V; LED1 with 330 Ω draws about 9 mA. When the battery falls below 7 V the output starts to drop. What you learn: fixed regulator, dropout voltage, dissipated power, quiescent current and battery life.

Premium Content

This circuit's build steps, how-it-works guide and FAQ are open to Premium members.

  • Build Steps
  • How It Works
  • Frequently Asked Questions