EL-100IntermediatePremiumPower supply circuits
Relay Self-Holding Circuit: Start and Stop
You press the Start button once, the relay pulls in, and it stays pulled in even after you let go of the button; sliding the Stop switch releases it. The secret is the relay's own NO contact: the contact bridges the start button and keeps feeding the coil by itself. This is called self-holding; it is the first circuit in any control wiring course. The 1N4007 diode connected in reverse across the coil protects the switch from the reverse voltage spike.
0.0(0)

It is built with a 5 V relay powered at 5 V from the MB102, a START button (S1), a slide switch for STOP (S2), a 1N4007 diode, a 220 Ω resistor and a red LED. The relay's NO contact is connected in parallel with S1: when you press S1 once, the coil is energized, the contact closes and keeps feeding the coil by itself. When S2 is opened, the relay releases. The contacts are only for the 5 V LED load; mains voltage is never connected. What you learn: self-holding, NO and NC contacts, flyback diode.
Premium Content
This circuit's build steps, how-it-works guide and FAQ are open to Premium members.
- Build Steps
- How It Works
- Frequently Asked Questions
