PI-90IntermediatePremium
Pico Sprint Stopwatch: Light Gates for PE Class (2 LDRs + TM1637)
Put one LDR light gate at the start of the track and one at the end: the time starts when the runner cuts the light of the first gate and stops at the second. The TM1637 display shows the time in seconds and hundredths, then the speed in km/h. A button press tunes the gates to the ambient light, then three beeps and "Go" give the start. When the class record falls, the display flashes "bESt" and a tune plays. A long press picks 10, 20 or 30 metres.
0.0(0)

Sprint times taken with a hand stopwatch in PE class depend on the reflexes of whoever presses the button. In this project two light gates keep the time: it starts by itself as the runner crosses the start line and stops by itself at the finish line. The display shows the time first, then the speed, and a short victory tune plays when the best time of the class is beaten. Along the way you learn to time with light sensors, adjust to ambient light and work out speed.
Source Code
Premium Content
The source code, block version and FAQ of this project are open to Premium members.
- All Project Code
- Block version
- Frequently Asked Questions
