PI-60BeginnerPremium
Raspberry Pi Pico Grip Strength Meter (HX711 + Load Cell + TM1637 + 3 LEDs + Buzzer)
The grip version of the fairground strength tester! Squeeze the 50 kg load cell between two handles: the HX711 reads the force, the TM1637 counts up in kilograms, the buzzer pitch rises and 3 LEDs show bronze, silver and gold. The peak is held, and the record stays in best.txt even through a power cut. In duel mode two players squeeze in turn and the winner gets a fanfare.
0.0(0)

Bring the fairground strength tester to your desk: as you squeeze the handles, the kilograms climb on the display, the tone gets higher and three lights come on one by one for bronze, silver and gold. Your strongest squeeze is kept as the record and is still there after you pull the plug. Challenge a friend to a duel and take turns squeezing; the winner's letter blinks on the display to a little victory tune.
Source Code
Premium Content
The source code, block version and FAQ of this project are open to Premium members.
- All Project Code
- Block version
- Frequently Asked Questions
