PI-81IntermediatePremium

Raspberry Pi Pico W Flagpole: A Motorized Pole That Raises the Flag Smoothly (NEMA 17 + A4988 + 2 Buttons + Buzzer)

A motorized flagpole with a Raspberry Pi Pico W. Press the green button and a NEMA 17 stepper winds the rope, raising the flag with a soft start, steady speed and soft stop in 40 seconds. The red button lowers it; hold it for 1 second and the flag first goes to the top, then down to half-mast. The position is kept by counting steps, an A4988 driver powers the motor from 12 V, and the buzzer only gives short beeps.

0.0(0)
Raspberry Pi Pico W Flagpole: A Motorized Pole That Raises the Flag Smoothly (NEMA 17 + A4988 + 2 Buttons + Buzzer)
Let a motor raise the flag at your school ceremony, slowly and without a single jerk. Press a button and the stepper winds the rope: the flag starts gently, climbs at a steady pace and eases to a stop at the top. The other button lowers it, and holding it brings the flag to half-mast. Along the way you see how to drive a motor that speeds up and slows down.

Source Code

Premium Content

The source code, block version and FAQ of this project are open to Premium members.

  • All Project Code
  • Block version
  • Frequently Asked Questions