Raspberry Pi Pico Traffic Light with 4-Mode Button Selector (State Machine, GP11-13 + GP4)

#158Intermediate

Premium

Raspberry Pi Pico Traffic Light with 4-Mode Button Selector (State Machine, GP11-13 + GP4)

4 different traffic light modes with just 1 button! 🚦 The mode changes with each press of the button: **Normal cycle** (red → yellow → green in sequence), **Red Only** (stop signal), **Yellow Flash** (caution/night mode), **Off** (maintenance). Concepts: **state machine** (the `mode` variable determines which behavior runs), **modulo mode cycling** (`(mode + 1) % 4` → 0→1→2→3→0 infinite loop), **non-blocking timing** (`time.ticks_ms()` + `ticks_diff()` instead of `time.sleep()` — the code does n

5.0(1)

Discover Arduino Projects

ESP32 Temperature Data Logger (DHT22 + DS1307 RTC + microSD + OLED)

ESP32 Motion Alarm System (PIR + Buzzer + LED + Telegram)

LED Railway Crossing Wigwags

Raspberry Pi Pico 3-Burst Police Flip-Flop (2 LED GP11 + GP12)

Raspberry Pi Pico Chasing LED (6 LEDs, GP14 → GP9)

Raspberry Pi Pico Knight Rider LED Scanner (6 LED Back-Forth, GP9 ↔ GP14)

Raspberry Pi Pico Button Controlled LED (Push, GP14 + GP2)

Raspberry Pi Pico Button Toggle LED (GP14 + GP2)

Raspberry Pi Pico: Independent Control of 2 LEDs Using 2 Buttons (GP12-13 + GP4-5)

Raspberry Pi Pico Traffic Light with 4-Mode Button Selector (State Machine, GP11-13 + GP4)

Raspberry Pi Pico Button Debounce: IRQ vs Software Polling (GP5 + GP4)

Raspberry Pi Pico PWM LED Fade (Breathing Effect, GP14)