EL-80AdvancedPremiumOp-amp circuits

Battery Level Indicator: LM358 and Three LEDs

A battery level indicator that shows how full a 9 V battery is with three LEDs: green above 8.4 V, yellow down to 7.25 V, red below that. The circuit is powered by the battery it measures. That is why the forward voltage of LED4 becomes a reference that does not depend on the battery. The two halves of the LM358 compare this reference with voltages from the resistor ladder, and you calibrate once with RV1.

0.0(0)
Battery Level Indicator: LM358 and Three LEDs
It is built with a 9 V battery, one LM358 (U1), four LEDs, a 10 kΩ pot (RV1), eleven resistors and two capacitors. R1, RV1, R2 and R3 divide the battery voltage. The red LED4 gives a reference of about 1.7 V. U1A changes its output when the battery falls below 8.4 V, and U1B when it falls below 7.25 V; LED1, LED2 and LED3 light one at a time according to these two outputs. R7 and R8 add hysteresis, and C2 cleans up the transition. What you learn: reference voltage, a two-threshold comparator, calibration.

Premium Content

This circuit's build steps, how-it-works guide and FAQ are open to Premium members.

  • Build Steps
  • How It Works
  • Frequently Asked Questions