EL-97IntermediatePremiumOp-amp circuits

Breathing LED (Triangle Wave)

The red LED slowly brightens over a few seconds, then slowly fades out, like the breathing of someone asleep. The two halves of the LM358 work together: one is a Schmitt trigger, the other an integrator. Together they produce a triangle wave of about 5 seconds. A BC547 follows this wave and drives the LED current from zero up to 18 mA. You learn about the virtual ground, a linear ramp made with a constant current, and the emitter follower.

0.0(0)
Breathing LED (Triangle Wave)
It is built with a 9 V battery, one LM358, one BC547, seven resistors, three capacitors and a red LED. Two resistors set up a 3.6 V virtual ground. The first half of the LM358 is a Schmitt trigger, the second half an integrator with 1 MΩ and 2.2 µF; together they produce a triangle wave of about 4.9 seconds that swings between 1.4 V and 5.6 V. The BC547 drives the LED as an emitter follower. What you learn: triangle wave, integrator, hysteresis, emitter follower.

Premium Content

This circuit's build steps, how-it-works guide and FAQ are open to Premium members.

  • Build Steps
  • How It Works
  • Frequently Asked Questions