EL-98AdvancedPremiumOp-amp circuits
LED VU Meter: A Light Bar That Rises with Sound
Talk into the microphone, clap or bring a speaker close: the ten-LED bar rises with the loudness of the sound and drops back in about a second when it goes quiet. A BC547 amplifies the microphone signal, a diode and a capacitor hold the peak value of the sound, and the LM3914 divides this voltage into 10 steps and lights the LEDs with a current set by a single resistor. You learn about half-wave rectification, the peak detector and the linear-scale bar graph display.
0.0(0)

It is built with a 9 V battery, one LM3914, an electret microphone, one BC547, one 1N4148 diode, seven resistors, five capacitors and ten LEDs. The microphone stage is the same as in the Electronic Candle circuit. The diode and the capacitor hold the peak value of the sound; the LM3914 measures this voltage in steps of 128 mV and, in bar mode, lights the LEDs one after the other. The scale is linear, and a loud sound is needed. What you learn: half-wave rectification, peak detector, current-controlled LED driving, supply filter.
Premium Content
This circuit's build steps, how-it-works guide and FAQ are open to Premium members.
- Build Steps
- How It Works
- Frequently Asked Questions
