EL-79IntermediatePremiumOp-amp circuits

Op-Amp Temperature Alarm: LM358 and NTC

A temperature alarm that sounds when the surroundings heat up. A bridge made of NTC1, RV1 and three resistors feeds voltages to the two inputs of the LM358; when the NTC heats up and passes the threshold, the output turns on the buzzer and the LED through Q1. You set the threshold with RV1 between about 30 and 59 °C, and R4 adds about 2 °C of hysteresis. Thanks to the bridge, the threshold does not drift even when the battery weakens.

0.0(0)
Op-Amp Temperature Alarm: LM358 and NTC
It is built with a 9 V battery, one LM358 (U1), an NTC (NTC1) that is 10 kΩ at 25 °C, a 100 kΩ pot (RV1), one BC547 (Q1), an active buzzer (BZ1), a red LED (LED1), seven resistors and one capacitor. R1, RV1 and NTC1 feed the − input, and R2 and R3 feed the + input. When NTC1 heats up and its resistance falls below (R1 + RV1) × 0.056, the output rises and Q1 turns on the buzzer and the LED. What you learn: bridge circuit, comparator, hysteresis, calculating temperature with the B constant.

Premium Content

This circuit's build steps, how-it-works guide and FAQ are open to Premium members.

  • Build Steps
  • How It Works
  • Frequently Asked Questions