EL-62IntermediatePremiumFlip-flop circuits
Who Pressed First? A Quiz Buzzer Circuit: Lockout with the 74HC74
Two contestants, two buttons: the LED of whoever presses first lights and locks, and it makes no difference how much the latecomer presses. The two D flip-flops in the 74HC74 hold each other's D input. The S3 reset button puts both out and a new round begins. Button bounce does not spoil the result, because every extra edge reloads the same value.
0.0(0)

It is built on a half-size breadboard with a 5 V supply, one 74HC74, three buttons, five resistors and two LEDs. S1 goes to the clock input of the first flip-flop and S2 to the clock input of the second; S3 pulls both reset inputs to GND together. The D input of each flip-flop is connected to the Q̄ output of the other: when one becomes 1, the D of the other drops to 0. LED1 shows S1 and LED2 shows S2. What you learn: lockout, the D flip-flop, the rising edge, the reset input and the race condition.
Premium Content
This circuit's build steps, how-it-works guide and FAQ are open to Premium members.
- Build Steps
- How It Works
- Frequently Asked Questions
