EL-95IntermediatePremiumCounter circuits

Sequential Turn Signal: A Filling Light Bar

Like the turn signal on new cars: seven yellow LEDs light up one at a time, adding to the bar, the lit ones stay lit, and once the bar is full they all go out and it starts over. An NE555 provides the clock and a 74HC595 shift register keeps the sequence. The eighth output of the shift register drives its own reset pin through a BC547; the bar empties itself. You learn about the shift register, what joining the two clock inputs does and the self-resetting counter.

0.0(0)
Sequential Turn Signal: A Filling Light Bar
It is built on a full-size breadboard with 5 V (MB102), one NE555, one 74HC595, one BC547, seven yellow LEDs, twelve resistors and three capacitors. The NE555 produces about 10 pulses a second. The data input of the 74HC595 is always 1; on every pulse one more 1 goes in and the LEDs light up one after another, adding to the bar. The eighth output sets the reset input to 0 through the BC547, the bar goes out and fills again. One lap takes about 1 second. What you learn: shift register, clock, self-resetting counter, calculating LED current.

Premium Content

This circuit's build steps, how-it-works guide and FAQ are open to Premium members.

  • Build Steps
  • How It Works
  • Frequently Asked Questions