EL-74IntermediatePremiumCounter circuits

0 to 9 Counter: 7-Segment Display with the 555 and CD4026

The single-digit display goes up once a second: 0, 1, 2 and so on up to 9, then back to 0. The NE555 produces a clock pulse of about 1 Hz, and the CD4026 counts these pulses and decides by itself which segments light for which digit; no separate decoder is needed in between. Press the button and the count returns to 0. You learn about the common cathode 7-segment display, why every segment needs its own resistor, and the reset input of a counter.

0.0(0)
0 to 9 Counter: 7-Segment Display with the 555 and CD4026
It is built with a 9 V battery, one NE555, one CD4026, a single-digit common cathode 7-segment display, ten resistors, three capacitors and one button. The 555 produces about one pulse a second; the CD4026 counts one step on every pulse and writes the digit straight to the display through its seven segment outputs. Each segment has its own 1 kΩ resistor, and the button pulls the count to 0. The display must be common cathode; a common anode display does not light in this circuit. What you learn: the 7-segment display, the difference between common cathode and common anode, segment resistors, the reset input.

Premium Content

This circuit's build steps, how-it-works guide and FAQ are open to Premium members.

  • Build Steps
  • How It Works
  • Frequently Asked Questions