EL-75IntermediatePremiumCounter circuits

Push-Button Scoreboard: A Number That Goes Up with Each Press with the CD4026

Each time you press S1, the single-digit display goes up by one: 0, 1, 2 up to 9, then back to 0. The CD4026 counts the presses and drives the digit on a common cathode 7-segment display by itself. Because the button contact bounces as it closes, one press could skip several numbers; an RC filter and the Schmitt input of the IC prevent this. S2 resets the score to 0.

0.0(0)
Push-Button Scoreboard: A Number That Goes Up with Each Press with the CD4026
It is built with a 9 V battery, one CD4026, a single-digit common cathode 7-segment display, ten resistors, three capacitors and two buttons. Each press of S1 gives a single pulse to the clock input of the CD4026: the filter made of R1, R2 and C1 swallows the switch bounce, and the Schmitt-trigger input of the IC counts cleanly. S2 pulls the count to 0, while C2 starts the counter from 0 when the battery is connected. The display must be common cathode. What you learn: switch bounce, RC filter, Schmitt input, reset.

Premium Content

This circuit's build steps, how-it-works guide and FAQ are open to Premium members.

  • Build Steps
  • How It Works
  • Frequently Asked Questions