EL-94IntermediatePremiumCounter circuits
Reaction Time Tester: How Fast Can You Stop the Light?
Your friend holds START down and lets go whenever they like: the light starts running along ten LEDs. You press STOP as soon as you see it move; the LED where the light stops shows your reaction time. The NE555 clock lights each LED for about 49 ms, the CD4017 counts the steps, and a second NE555 remembers START and STOP. If you are too late, the light stops at the last LED.
0.0(0)

It is built with a 9 V battery, two NE555s, one CD4017, ten LEDs, two push buttons, fifteen resistors, four capacitors and one 1N4148 diode. In astable mode U1 produces a clock of 1.44 / (70.7 kΩ × 1 µF) ≈ 20.4 Hz; each step is about 49 ms. In bistable mode U2 works as a latch and drives the clock inhibit input of the CD4017 (pin 13). Q9 is also connected to this input, so the light stays at LED10. What you learn: measuring time from the clock frequency, a latch with the 555, and the clock inhibit input.
Premium Content
This circuit's build steps, how-it-works guide and FAQ are open to Premium members.
- Build Steps
- How It Works
- Frequently Asked Questions
