EL-72IntermediatePremiumCounter circuits

Electronic Dice: Six-LED Dice with the 555 and 4017

Press the button and all six LEDs glow at once; release it and only one stays lit. Its position from the left is your roll. The NE555 produces about 686 pulses a second, and with them the CD4017 counts from 1 to 6 and starts over. The count goes round so fast that you cannot control where it stops; that makes the result random. You learn how to reset a counter at any number you like, how to switch the clock line on and off with a button, and what a pull-down resistor is.

0.0(0)
Electronic Dice: Six-LED Dice with the 555 and 4017
It is built with a 9 V battery, one NE555, one CD4017, six LEDs, nine resistors, three capacitors and one button. Instead of the seven-dot pattern of a real dice, six LEDs side by side are used; the position of the lit LED from the left is the value of the dice. The 555 produces a 686 Hz clock all the time, and while the button is pressed this clock reaches the CD4017. Because the seventh output of the counter is connected to the reset input, the count returns to 1 after 6. What you learn: shortening the cycle of a counter, switching the clock line on and off with a button, the pull-down resistor and equal probability.

Premium Content

This circuit's build steps, how-it-works guide and FAQ are open to Premium members.

  • Build Steps
  • How It Works
  • Frequently Asked Questions