Elektronicagidsen
Leer de onderdelen kennen, kies het juiste board en bouw je projecten met vertrouwen.
ComponentenEen I2C-lcd (16x2) gebruiken met Arduino, ESP32 en Pico
Leer een 16x2-lcd met I2C-module aan te sluiten met slechts 4 draden, het adres te vinden, tekst en getallen weer te geven, berichten te laten scrollen en eigen symbolen te tekenen.
Verder lezen
ComponentenDHT11 temperatuur- en vochtigheidssensor: gids voor Arduino, ESP32 en Pico
Leer de DHT11 aansluiten op Arduino, temperatuur, luchtvochtigheid en hitte-index uitlezen met de DHT-bibliotheek, hem gebruiken op de ESP32 en Pico en weten wanneer de DHT22 de betere keuze is.
Verder lezen
ComponentenHC-SR04-afstandssensor: afstand meten met ultrageluid en Arduino
Leer hoe de HC-SR04 afstand meet met geluid, hoe je hem aansluit op Arduino, wat de afstandsformule is en hoe je metingen stabiel maakt.
Verder lezen
ComponentenActieve en passieve buzzer: wat is een buzzer en hoe gebruik je hem
Leer het verschil tussen een actieve en een passieve buzzer, sluit er een aan op Arduino en speel noten met tone() om je eigen melodie te maken.
Verder lezen
BasisEen drukknop aansluiten op Arduino: pull-up, pull-down en contactdender
Ontdek waarom een knop op zichzelf onbetrouwbaar leest, wat een pull-upweerstand doet, hoe je INPUT_PULLUP gebruikt en hoe debounce ervoor zorgt dat indrukken goed tellen.
Verder lezen
ComponentenWat is een potentiometer? Analoog uitlezen en aansturen met Arduino
Leer hoe een potentiometer zijn waarde verandert als je eraan draait, hoe je hem op Arduino aansluit en hoe je de analoge waarde gebruikt om een led, een servo of het volume aan te sturen.
Verder lezen
ComponentenWat is een servomotor? Servo's aansturen met Arduino
Leer hoe een servo naar een ingestelde hoek draait, waar de draden voor dienen, hoe je hem met Arduino aanstuurt en waarom hij vaak een aparte voeding nodig heeft.
Verder lezen
ComponentenWat is een led? Zo werkt hij en zo sluit je hem aan op Arduino
We leggen met voorbeelden uit hoe een led werkt, hoe je de pootjes herkent en welke weerstand je nodig hebt zodat hij niet doorbrandt.
Verder lezen
GidsenWelke Arduino moet ik kopen? Uno, Nano, Mega of Leonardo
Arduino Uno, Nano of Mega? We zetten de boards naast elkaar in een tabel en leggen uit welk board bij welk project past.
Verder lezen
ComponentenWat is een weerstand? Kleurcodes, de wet van Ohm en weerstanden gebruiken met Arduino
Leer wat een weerstand doet, hoe je de kleurringen leest en welke weerstand je waar nodig hebt in Arduino-projecten.
Verder lezen
BasisWat is een breadboard? Interne verbindingen en hoe je het goed gebruikt
Leer de interne verbindingen en voedingsrails van het breadboard, waarmee je schakelingen bouwt zonder te solderen, plus de fouten die beginners het vaakst maken.
Verder lezen
ComponentenArduino-sensorengids: de 12 meestgebruikte sensoren
Van temperatuur tot afstand, van gas tot beweging: de sensoren die het meest in Arduino-projecten worden gebruikt, met bedradingstips en veelgemaakte fouten, alles op één plek.
Verder lezen
BasisWat is Arduino? Een complete gids voor beginners
We leggen in gewone taal uit wat Arduino is, waarom het zo populair is en wat je nodig hebt om je eerste project te bouwen.
Verder lezen
Berichten in het Engels
BasisHow to Understand Arduino Code: Read a Sketch Line by Line
Instead of copying a ready-made Arduino sketch, learn to read it: spot its parts, work through an example line by line, adapt it to your circuit, the ESP32 and the Pico, and practise with Understand the code in BlueGrays.
Lees in het Engels
GidsenESPHome ESP32 Tutorial: Add Sensors to Home Assistant, No Code
Install the ESPHome Device Builder, write your first YAML file, flash the ESP32 once over USB and then over Wi-Fi, and add a DHT22, PIR, relay and LED to Home Assistant without a line of C++.
Lees in het Engels
ComponentenMQ Gas Sensors Comparison: MQ-2 to MQ-135, Which One to Use
Compare nine MQ gas sensors, from the MQ-2 to the MQ-135, in one table: which gas and ppm range each detects, how to wire and preheat them, how to calculate ppm and which to use for which project, with shared code for Arduino, ESP32 and Pico.
Lees in het Engels
GidsenArduino Servo Motor Projects: 15 Ideas, SG90 vs MG996R
15 servo motor projects, from a radar and robot arm to an RFID door lock, solar tracker and automatic pet feeder: the right servo, servo count, driving method and power supply for each, with code for the Uno, ESP32 and Pico.
Lees in het Engels
GidsenArduino Alarm Clock: DS3231 RTC, LCD, Buzzer and Snooze
Build an Arduino alarm clock with an RTC module, I2C LCD, three buttons and a buzzer that keeps time through power cuts, stores the alarm in EEPROM and has a snooze button; then get the time from the internet with an ESP32.
Lees in het Engels
BasisnF to µF Conversion: Capacitor Codes and Electronics Units
Learn the p, n, µ, m, k and M prefixes in one table: read capacitor codes, work out mA, kΩ and mAh in your head, and stop unit mistakes from creeping into your Arduino code.
Lees in het Engels
ComponentenPCF8574 Arduino: I2C I/O Expander for 8 Extra Pins, with Code
Add 8 pins to an Arduino, ESP32 or Pico over just two wires with the PCF8574: address table, LED and button wiring, the INT interrupt, what is inside the I2C LCD backpack and how it compares with the MCP23017.
Lees in het Engels
GidsenArduino Police Lights: LED Flash Patterns, WS2812B and Siren
Build realistic police lights on Arduino, ESP32 and Pico: double and triple flash patterns with red and blue LEDs, non-blocking millis code, a WS2812B light bar and a passive buzzer siren.
Lees in het Engels
ComponentenESP32 Cheap Yellow Display (CYD): Pinout, Setup and LVGL
Learn the CYD pinout, how to tell the board versions apart and how to set up TFT_eSPI, then build a touch control panel, log data to the SD card and create your first LVGL interface.
Lees in het Engels
BasisArduino I2C Master Slave: Connect Two Arduinos, Send Structs
Get two Arduinos talking over just two wires: set up the controller and the target, send bytes and structs with Wire.onReceive and onRequest, pick the right pull-up resistor and address, and safely connect an ESP32 or Pico through a level shifter.
Lees in het Engels
GidsenArduino Egg Incubator: DHT22, Relay, Egg Turner and Full Code
Build your own Arduino egg incubator: measure temperature and humidity with a DHT22, drive the heater through a relay with hysteresis, turn the eggs with a servo, keep a day counter that survives power cuts and watch the hatch from your phone with an ESP32.
Lees in het Engels
