EL-22BeginnerPremiumTransistor circuits
Delayed-Off Light: Transistor Staircase Timer
Press and release the button: the LED stays at full brightness for a few seconds, then fades. This is the idea behind a staircase timer in an apartment building. The 470 µF capacitor charges while you hold the button; on release, it supplies a small base current to the BC547, keeping it on. Since the supply provides the LED current, this capacitor keeps the light on for about 10 seconds. See the RC time constant and base current in your own circuit.
0.0(0)

It is built with a 5 V supply, one BC547, one 470 µF electrolytic capacitor, two 220 Ω and two 10 kΩ resistors, one button and one red LED. When you press the button, the capacitor charges through 220 Ω in about a tenth of a second and the LED lights with 13 mA. When you release the button, the capacitor feeds current into the base through 10 kΩ; the LED stays at full brightness for a few seconds, then dims and goes out in about 10 seconds. What you learn: the RC time constant, base current, capacitor polarity and timing with a transistor.
Premium Content
This circuit's build steps, how-it-works guide and FAQ are open to Premium members.
- Build Steps
- How It Works
- Frequently Asked Questions
