EL-17IntermediatePremiumTransistor circuits

Temperature Alarm: Two-Transistor Heat Warning with an NTC

A temperature alarm that sounds when the surroundings warm up. The resistance of an NTC thermistor drops as the temperature rises; this change in a voltage divider triggers a switch built with two BC547s, the active buzzer sounds and the LED lights. You set the threshold with a 100 kΩ pot between about 23 °C and 50 °C. A feedback resistor prevents crackling at the threshold. You try it out by holding the NTC between your fingers or warming it with a hair dryer.

5.0(1)
1 completed
Temperature Alarm: Two-Transistor Heat Warning with an NTC
It is built with a 9 V battery, two BC547s, an NTC thermistor of 10 kΩ at 25 °C, a 100 kΩ pot, an active buzzer, an LED and five resistors. As the NTC warms up, the voltage at the base of Q1 drops below 0.6 V, Q1 turns off and Q2 drives the buzzer and the LED. R2 (1 MΩ) puts a gap of 1 to 2 °C between the temperatures at which the alarm switches on and off. What you learn: the thermistor and its B constant, setting a threshold with a voltage divider, the two-stage switch, hysteresis and why this circuit is not a real fire alarm.

Premium Content

This circuit's build steps, how-it-works guide and FAQ are open to Premium members.

  • Build Steps
  • How It Works
  • Frequently Asked Questions