EL-25IntermediatePremiumTransistor circuits
Two-Transistor Beep Circuit: A Tone with the BC547 and BC557
While you hold the button, the speaker gives a beep of about 1 kHz. There is no IC: a BC547 (NPN) and a BC557 (PNP) make the sound together; this pair is called a complementary pair. The tone is set by a 47 nF capacitor and two resistors. A 220 Ω resistor in series with the speaker keeps the transistor far below its 100 mA limit.
0.0(0)

It is built with a 9 V battery, one BC547, one BC557, an 8 Ω speaker, a 47 nF capacitor, six resistors and a button. When you press the button, the two transistors turn each other on and off and send current to the speaker about 1000 times a second. The capacitor amplifies every change, and the resistor going to the emitter keeps the circuit from getting stuck in one state. The peak current of the speaker is about 39 mA. What you learn: the complementary transistor pair, positive and negative feedback, calculating the tone with an RC and the speaker current.
Premium Content
This circuit's build steps, how-it-works guide and FAQ are open to Premium members.
- Build Steps
- How It Works
- Frequently Asked Questions
