EL-83IntermediatePremiumTransistor circuits

Magnetic Door Alarm: A Latching Alarm with a Reed Switch

Put a reed switch (S2) on the frame and a magnet on the door: the moment the door opens, the buzzer sounds and the LED lights. Closing the door again does not silence the alarm; only the reset button (S1) does. A BC547 (Q1) and a BC557 (Q2) hold each other on and latch like a thyristor. While waiting, it draws only about 0.09 mA from the battery.

0.0(0)
Magnetic Door Alarm: A Latching Alarm with a Reed Switch
It is built with a 9 V battery, one BC547 (Q1), one BC557 (Q2), a two-legged reed switch (S2), a magnet, an active buzzer (BZ1), a red LED (LED1), seven resistors, a 100 nF capacitor (C1) and a reset button (S1). While the door is closed, the magnet holds the reed closed and the circuit is silent. When the door opens, the reed opens and the two transistors latch. What you learn: contactless sensing, thyristor logic, standby current and battery life. It is not a real security system.

Premium Content

This circuit's build steps, how-it-works guide and FAQ are open to Premium members.

  • Build Steps
  • How It Works
  • Frequently Asked Questions