EL-84AdvancedPremiumTransistor circuits

Two-Button Motor Direction: A Four-Transistor Mini H-Bridge

Press S1 and the motor runs forward; press S2 and it runs in reverse. Four transistors connect the two motor terminals to + and GND in turn; this is called an H-bridge. Each button turns on two diagonal transistors: S1 turns on Q1 and Q4, S2 turns on Q3 and Q2. When you press both, D5 and D6 keep the lower transistors off, the motor stops safely, and no short circuit flows through the same branch.

0.0(0)
Two-Button Motor Direction: A Four-Transistor Mini H-Bridge
It is built with 4 × AA batteries, two BD140s (Q1, Q3), two BD139s (Q2, Q4), six 1N5819 diodes, eight resistors, three electrolytic capacitors, two push buttons and a 3 to 6 V geared DC motor (M1). Each button turns on the two transistors at diagonal corners, and the current passes through the motor in opposite directions. Pressing both buttons brakes the motor. What you learn: the H-bridge, shoot-through protection, transistor saturation voltage, flyback diodes and dead time.

Premium Content

This circuit's build steps, how-it-works guide and FAQ are open to Premium members.

  • Build Steps
  • How It Works
  • Frequently Asked Questions