EL-26AdvancedPremiumTransistor circuits

Clap-Activated LED: A Sound Detector with Three BC547s

Clap your hands: the red LED lights, stays on for about 1.6 seconds and goes out by itself. There is no IC: an electret microphone picks up the clap, a BC547 amplifier lifts the few-millivolt signal to the volt level, and a one-shot circuit built with two BC547s keeps the time. You learn amplifying a small signal, coupling with a capacitor, choosing direction with a diode and filtering the supply.

0.0(0)
Clap-Activated LED: A Sound Detector with Three BC547s
It is built with a 9 V battery, an electret microphone, three BC547s, two 1N4148 diodes, ten resistors, four capacitors and a red LED. Q1 amplifies the few-millivolt signal of the microphone about 50 times. C2 and D2 carry only the upward jump to Q3; Q3 and Q2 light the LED like a one-shot circuit, and C3 and R6 put it out after about 1.6 seconds. R8 and C4 protect the microphone stage from the ripple on the battery. What you learn: the common-emitter amplifier, coupling, the threshold and the RC time.

Premium Content

This circuit's build steps, how-it-works guide and FAQ are open to Premium members.

  • Build Steps
  • How It Works
  • Frequently Asked Questions