EL-91AdvancedPremium555 timer circuits
Electronic Candle: An LED You Blow Out
Hold your phone's light over the LDR: the yellow LED lights and stays lit even after you take the light away. Blow on the microphone from close up: it goes out. Whether it is lit or out is remembered by an NE555 working in bistable mode; the blow is picked up by an electret microphone and an amplifier with two BC547s. The microphone cannot tell a blow from a sound: a clap or a loud sound close by can also put the LED out. This is a toy circuit; there is no real flame.
0.0(0)

It is built with a 9 V battery, one NE555, two BC547s, one electret microphone, one LDR, a 1 kΩ potentiometer, eight resistors, five capacitors and a yellow LED. The LDR and the pot form a voltage divider: in strong light pin 2 falls below 1/3 of the supply and the LED lights. When you blow, Q1 amplifies the signal, Q2 pulls pin 4 to GND and the LED goes out. R8 and C5 protect the microphone stage from ripple on the battery. What you learn: using the 555 as a memory, the common-emitter amplifier, the filter and the voltage divider.
Premium Content
This circuit's build steps, how-it-works guide and FAQ are open to Premium members.
- Build Steps
- How It Works
- Frequently Asked Questions
