EL-38IntermediatePremium555 timer circuits
Two-Tone Doorbell: A Ding Dong Sound with the 555
Press the button: the speaker gives a high ding at about 640 Hz. Let go: the sound drops to 510 Hz, becomes the dong and fades out in about 1.3 seconds. A single NE555 makes both tones; the dong is played by the 2200 µF capacitor charged through the button. When the button is not pressed, the circuit draws no current at all from the battery, so it can stay connected.
0.0(0)

It is built with a 9 V battery, one NE555, one button, one 1N4007 diode, five resistors, four capacitors and an 8 Ω speaker. Through the diode, the button charges C3 (2200 µF); the NE555 is powered from C3, not from the battery. While the button is pressed, an extra resistor raises the tone (ding); when you let go, this resistor drops out of the circuit (dong) and the sound fades as C3 discharges. The two tones are a major third apart. What you learn: the astable 555, separating paths with a diode, powering from a capacitor and zero standby current.
Premium Content
This circuit's build steps, how-it-works guide and FAQ are open to Premium members.
- Build Steps
- How It Works
- Frequently Asked Questions
