EL-34BeginnerPremium555 timer circuits

Buzzer Tone Generator: Audio Frequency with the 555

Turn an NE555 IC into a switch that opens and closes about 686 times a second, and hear the result with your own ears. When you press the button, the passive buzzer gives a high, steady tone; two resistors and a capacitor set how high or low it sounds. In a circuit you built yourself, you see what audio frequency is, the frequency formula of astable mode and why the sound gets higher when you change one resistor.

0.0(0)
Buzzer Tone Generator: Audio Frequency with the 555
A 9 V battery, an NE555, three resistors, two ceramic capacitors, a push button and a passive buzzer are all you need. The 555 charges the capacitor C1 through R1 and R2 and discharges it through R2, and so produces a 686 Hz square wave at its output. When you press the button, this wave reaches the buzzer through R3 and you hear the tone. What you learn: the link between frequency and pitch, the astable frequency calculation, the difference between a passive and an active buzzer, why a series resistor goes on the output. In the task you add a potentiometer and tune the tone by hand.

Premium Content

This circuit's build steps, how-it-works guide and FAQ are open to Premium members.

  • Build Steps
  • How It Works
  • Frequently Asked Questions