EL-29BeginnerPremium555 timer circuits
Two LEDs Lighting in Turn: Source and Sink with the 555 Output
A red and a green LED light in turn: one lights while the other goes out, each for about half a second. A single NE555 does it all. When the output (pin 3) is high it sources current to one LED; when it is low it sinks the current coming from the other LED. A small 1 kΩ R1 makes the two times almost equal, and a resistor in parallel with LED2 stops both LEDs from glowing faintly at the same time.
0.0(0)

It is built with a 9 V battery, one NE555, five resistors, two capacitors, a red LED and a green LED. The 555 runs in astable mode and cycles about once per second. When the output is high, current flows from pin 3 to the red LED; when it is low, current flows from the + rail through the green LED into pin 3. R5 divides the small voltage left across the green LED while the red one is on, keeping it fully dark. What you learn: the 555 output that sources and sinks current, frequency and duty calculation, LED threshold voltage.
Premium Content
This circuit's build steps, how-it-works guide and FAQ are open to Premium members.
- Build Steps
- How It Works
- Frequently Asked Questions
