EL-90IntermediatePremium555 timer circuits

Laser Gun Sound

Press the button and let go: the speaker gives a sliding "pew" sound like in science fiction films. The sound starts at about 2.1 kHz and fades out within a quarter of a second, dropping in pitch as it goes. The tone comes from a single NE555; the slide is made by a 100 µF capacitor that starts discharging the moment you release the button. The speaker is not connected straight to the output, but through a capacitor and a resistor. This circuit is just a sound effect.

0.0(0)
Laser Gun Sound
It is built with a 9 V battery, one NE555, four resistors, four capacitors, one push button and an 8 Ω speaker. The NE555 produces a tone in astable mode, but the timing resistors are not connected straight to the battery; they go to the 100 µF C3, which the button charges. While the button is pressed the tone is about 2.1 kHz; when you release it, C3 discharges, and as its voltage approaches 6 V the tone drops to a few hundred Hz and the sound stops. The speaker is driven through 47 µF and 100 Ω. What you learn: the astable 555, threshold voltages, RC discharge and driving a speaker.

Premium Content

This circuit's build steps, how-it-works guide and FAQ are open to Premium members.

  • Build Steps
  • How It Works
  • Frequently Asked Questions