EL-40IntermediatePremium555 timer circuits

PWM Motor Speed: DC Motor Control with a 555 and a MOSFET

Turn the pot and the geared DC motor slows down or speeds up. The NE555 produces a signal that switches on and off about 8300 times per second; this signal turns the IRLZ44N MOSFET on and off like a switch, and the motor receives 9 V in short pulses. The average voltage grows with the duty and reaches about 6 V at most. The diode connected backwards across the motor safely absorbs the kick-back of the coil.

0.0(0)
PWM Motor Speed: DC Motor Control with a 555 and a MOSFET
It is built with a 9 V battery, one NE555, one IRLZ44N MOSFET, a 100 kΩ pot, three diodes, four resistors, four capacitors and a geared DC motor rated 3 to 6 V. The PWM stage has the same structure as the PWM LED Dimming circuit, but the frequency is about 8 kHz and R2 stops the duty at about 68%. What you learn: power switching, a logic-level MOSFET, a flyback diode, average voltage and the internal resistance of the battery.

Premium Content

This circuit's build steps, how-it-works guide and FAQ are open to Premium members.

  • Build Steps
  • How It Works
  • Frequently Asked Questions