EL-33BeginnerPremium555 timer circuits

Touch Timer: A Finger-Triggered 555

Hold the two wire ends together with one finger: the LED lights and goes out by itself after about 7.5 seconds. Your finger acts like a resistor of a few megohms between the two ends and pulls the trigger input of the NE555 down. The 10 MΩ resistor that holds the input high makes even this tiny current enough. You see for yourself, with your own finger, how sensitive the trigger input is and what that sensitivity depends on.

0.0(0)
Touch Timer: A Finger-Triggered 555
It is built with a 9 V battery, one NE555, four resistors, two capacitors, one LED and two touch wires. The 10 MΩ resistor holds pin 2 at 9 V; when a finger holds the two wires together, a path to GND opens through the skin and the input falls below 3 V. The output stays high for 1.1 × 68 kΩ × 100 µF ≈ 7.5 seconds and the LED lights. The 100 kΩ resistor protects the input from static electricity. What you learn: the monostable 555, the trigger threshold, a high-value pull-up resistor and the resistance of skin.

Premium Content

This circuit's build steps, how-it-works guide and FAQ are open to Premium members.

  • Build Steps
  • How It Works
  • Frequently Asked Questions