EL-41BeginnerPremium555 timer circuits

Darkness Alarm: A 555 Circuit That Sounds When the Light Goes Out

An alarm that starts sounding when the light goes out. The NE555 produces a tone of about 1.4 kHz in the speaker; a BC547 controls the RESET input (pin 4). In the light, the LDR turns the transistor on, pin 4 is pulled to GND and the 555 goes silent. In the dark, the transistor turns off and the alarm sounds. With the pot you set the threshold between about 0.2 and 45 lux.

0.0(0)
Darkness Alarm: A 555 Circuit That Sounds When the Light Goes Out
It is built with a 9 V battery, one NE555, one BC547, one LDR, a 10 kΩ pot, six resistors, four capacitors and an 8 Ω speaker. The NE555 produces the tone in astable mode; the transistor pulls pin 4 to GND like a switch. What you learn: driving the RESET input with a sensor, switching with a transistor, calculating a threshold with a voltage divider, and battery current.

Premium Content

This circuit's build steps, how-it-works guide and FAQ are open to Premium members.

  • Build Steps
  • How It Works
  • Frequently Asked Questions